Airflow: 3,450 cfm (High); 2,300 cfm (Low)
Net Weight: 32 pounds
Power Supply Requirements: 115-120 volts AC, 60 Hz, 15 amp circuit
Normal Operating Amps: High speed: 2.8 A @ 120 VAC, 60 Hz. Low speed: 2.3 A @ 120 VAC, 60 Hz
Circuit Breaker: 10 amps
Cabinet Material: UL94HB flame retardant resin with EPA-Registered microbial inhibitor
Power Cord: Hard wired 14/3 SJTW power cord with molded plug
Controls: Three-position HIGH/LOW/OFF motor switch with green "unit on" light indicating fan operation
Transportability: Built-in ergonomic carry-handle for even weight distribution and perfect balance
Non-Marking Rubber Feet: Attached rubber feet protect surfaces, eliminate vibration and secure the RAM3000D firmly in place during operation
RAM3000D Axial Air Mover Creates High-Velocity, High-Volume Airflow for Drying Structures Faster
The powerful, durable and lightweight RAPTOR RAM3000D is a deluxe, full feature axial air mover from Abatement Technologies. It delivers almost 3,500 cfm of high velocity airflow right where you need it for structural drying, yet draws less than three amps. The RAM3000D is specially designed to dry sub-surface materials, such as carpet pads and subflooring, in "top-down" or "in-place" conditions.
A multi-position design allows the contractor to drive airflow at a downward angle, providing concentrated drying power to the wettest areas to speed up the drying process. When not in use, multiple RAM3000D units can be stacked securely with built-in interlocking channels molded into the impact-resistant housing.
RAM3000D Axial Air Mover controls include a three-speed switch, a green “On” lamp, circuit breaker, hour meter and a GFCI protected duplex receptacle for daisy-chaining up to 4 units together on one 15-amp circuit. A more basic model, the RAM3000S, is also available that does not include the GFCI receptacle, hour meter and circuit breaker.
The Abatement Technologies RAM3000D Axial Air Mover has been tested by Intertek Testing Services (ITS), and found to comply with applicable UL and CSA electrical safety requirements.
Lightweight High-CFM, Low Amperage Axial Air Mover with Ergonomic Design Weighs Only 32 Pounds
State-of-the-art design and convenience features of RAPTOR RAM3000 Series Axial Air Movers include:
RAM3000D Folding Stand Maximizes Airflow
Maximize the drying power of the RAPTOR RAM3000D Air Mover by positioning it above wet areas with the optional folding stand. The sturdy stand allows the RAM3000D to spread airflow across more area and provides full 360-degree directional rotation. This great add-on weighs only 7 pounds and folds flat to save space.
Stack Safely Out of the Way
Two RAM3000D units can be stacked
safely and securely ready for immediate use.
Interlocking tabs molded into the side of the cabinet hold the units in place.
Easy-to-Use Control Panel
The low-profile controls of the RAM3000D are recessed to protect them from damage. The built-in GFCI-protected duplex receptacle allows daisy-chain operation of up to four units on a single 15 amp circuit. Other components include a HIGH/LOW/OFF 3-position rocker switch, a green "fan on" indicator light and a built-in hour meter that logs real time operating hours at the job site.
Built-In Cord Wrap
The extra long 25' power cord with grounded plug stores neatly around the built-in cord wrap.
All Abatement RAPTOR air movers have been tested by a Nationally Recognized Testing Laboratory (NRTL) and carry the marks certifying that they comply with applicable OSHA, UL and CSA electrical safety standards.