Stage 3 optional pre-filter - 2""-deep high-capacity VAPOR-LOCK® carbon filter for gas and odor adsorption (MERV 7)
Final stage HEPA filter - IEST compliant metal-frame, HEPA filter with tested and certified minimum efficiency of 99.97% @ 0.3 microns
Airflow ratings estimates are based on factory and independent testing @ 120 VAC with an air straightener and a traverse of readings taken with a computing vane-anemometer. Actual results may vary for various reasons,including motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and inlet and outlet ducting will reduce airflow. Use these ratings as a general guideline only.
Compact, Upright Design Fits Easily into Tight Spaces
The full-feature HEPA-AIRE PAS1200 Portable Air Scrubber from Abatement Technologies® is the stainless-steel counterpart to our PRED1200 model, with similar performance characteristics. The PAS1200 features variable airflow control from 300 cfm to 900 cfm. Multiple units can be daisy-chained on one 15-amp circuit via the GFCI-protected duplex receptacles. The PAS1200 is capable of maintaining 6 ACH in spaces up to 7,500-9,000 ft³ at peak rated airflow.
The PAS1200 Portable Air Scrubber is designed to employ up to four filter stages to remove potentially hazardous airborne particles from healthcare construction, maintenance, and renovation zones
First stage pre-filter - Inexpensive 1"-deep pre-filter for larger particles
Second stage pre-filter - 2"-deep pleated filter for medium-sized particles
Third stage pre-filter (optional, not included with the unit) - 2"-deep high-capacity carbon filter for gases and odors
Final stage - Tested & certified 99.97%-efficient metal-frame HEPA filter
Features of the HEPA-AIRE PAS1200 Portable Air Scrubber include
Easy to Transport - 8” non-marking rear wheels with smooth tires roll quietly and protect floors
Maneuverable in Small Spaces - Front swivel casters allow the PAS1200 to “turn on a dime” in tight spaces
Solid-Rivet Aircraft Construction - Strong leak-resistant cabinets
User-Friendly Controls - A complete array of convenient controls enables users to continuously monitor the operating status of the PAS1200
Safety First - NRTL certified to conform to UL507 and CSA 22.2 safety standards
Easy 'No Tools' Pre-Filter Access - Fast filter changes
Separate Pre-Filter Compartments - Less bypass, helps prevent premature HEPA loading
230 VAC/50 Hz Export Model - PAS1200TF runs on 230 Volt/50 Hz current (1,000-1,250 m³/hr.)
Filters Pollutants Using up to Four Stages of Filtration The PAS1200 uses a special backward-curved blower and high-speed motor to pull pollutants through up to four stages of filtration.
Recessed Control Panel The recessed control panel provides all controls in one location.
Control Panel Features:
Variable speed control
‘Power On’ indicator lamp
‘Replace Pre-filter’ indicator lamp
‘Replace HEPA’ indicator lamp
Male power receptacle
Pop-out circuit breaker
All Abatement HEPA-CARE units have been tested by a Nationally Recognized Testing Laboratory (NRTL) and carry the marks certifying that they comply with applicable OSHA, UL and CSA electrical safety standards. Filters meet UL900 flammability standards. Learn more about the importance of product safety certification in the Learning Center.