Rated Airflow*: 700-2,100 cfm
Air Changes Per Hour: 6 ACH in areas up to 18,000-21,000 ft³
Net Weight with Filters: 170 pounds
Dimensions (L x W x H): 31.50”L x 25.25”W x 49.75”H
Power Supply Requirements: 120 VAC, 60Hz, 15 amps
Normal Operating Current: 12 amps or less (safe for 15A circuits)
Electrical Safety: NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
Motor: High-efficiency type, 3,450 RPM, 1.5 HP
AT Gold Blower: Anodized-Aluminum, 5.5” peak static lift
Controls: Off/High/Low speed selector switch, green power indicator lamp, separate amber ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, hour meter, resettable pop-out 12A circuit breaker
Cabinet Material: 20 gauge stainless steel construction with solid, aircraft-type rivets
Built-in Dolly: Two-wheel dolly with 10” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for easy movement & control
Easy to Replace Pre-Filters: Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
Pre-Filter Mounting: Separate slide-in compartments for up to 3 pre-filter stages
Stage 1 pre-filter - Inexpensive, 1”-deep FIBER-TRAPPER® 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
Stage 2 pre-filter - Pleated, 2”-deep filter for medium-sized particulates (10-100 microns)
Stage 3 pre-filter (not included) - High-capacity 2""-deep VAPOR-LOCK® carbon filter for gases & odors
Final stage HEPA filter - High-capacity, for 0.1-10 micron particles, certified test efficiency of 99.97% or higher @ 0.3 microns, metal-frame
Inlet/Outlet Manifold - Molded slide-in plastic manifold for attaching 12” inlet or outlet ducting (one included)
Airflow ratings estimates are based on factory and independent testing @ 120 VAC with an air straightener and a traverse of readings taken with a computing vane-anemometer. Actual results may vary for various reasons,including motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and inlet and outlet ducting will reduce airflow. Use these ratings as a general guideline only.
The Ultimate Combination of Power & Portability
Exceptional performance and a full array of user-friendly features have made the Abatement Technologies® PAS2400 Portable Air Scrubber* a popular choice for capturing airborne particles during facility construction and renovation. With peak tested airflow of up to 2,100 cfm, and a maximum static lift of 5.5”, it’s the highest output Portable Air Scrubber that is NRTL-certified to operate safely on a 120 V/15 amp electrical supply.
The PAS2400HC Portable Air Scrubber has several filter stages with exceptional dirt-holding capacity, and optional gas and odor removal capabilities:
‘Zero Bypass’ Design and True HEPA Filter
A unique cabinet design and a true high-capacity, IEST-compliant HEPA filter help ensure that the PAS2400 exhausts 99.97%+ efficiency air out of the work area, job after job, month after month."
The PAS2400 comes equipped with many outstanding features including:
Portable and Maneuverable
The upright design, built-in transport dolly and perfect weight and balance of the PAS2400 enables the operator to effortlessly tilt it back and wheel silently to the work area.
Built-in Stair Climber
The built-in stair climber further enhances portability by making it easier to go up or down stairs. The upper pre-filter module can also be detached and hand-carried to further lighten the load.
Modular Control Panel
Everything you need to operate the PAS2400 is conveniently located in one location.
Control Panel Features:
All Abatement HEPA-CARE units have been tested by a Nationally Recognized Testing Laboratory (NRTL) and carry the marks certifying that they comply with applicable OSHA, UL and CSA electrical safety standards. Filters meet UL900 flammability standards. Learn more about the importance of product safety certification in the Learning Center.
The filters listed are for the most recent versions of our equipment. Please confirm fit with your solutions specialist when placing an order.
Customers who purchased this product were also interested in the following products: