Airflow*: 300-900 cfm
Air Changes Per Hour: 6 ACH @ 9,000 ft³
Net Weight with Filters: 85 pounds
Shipping Weight: 95 pounds
Dimensions (L x W x H): 19.25”L x 22”W x 39”H
Power Supply Requirements: 120 VAC, 60Hz, 15 amps
Power Consumption: 3.5 amps or less
GFCI-Protected Duplex Receptacle: Daisy-chain multiple units on one 15 amp circuit
Motor/Blower: High-efficiency airfoil type motorized impeller rated for 100,000 hours, with thermal overload protection & auto reset
Circuit Breaker: 12 amp pop-out style
Electrical Safety: NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
Cabinet Material: 20 gauge corrosion-resistant stainless steel
Cabinet Construction: Solid, aircraft-type rivets
Built-in Dolly: Integral transport dolly with 8” rear wheels and solid, non-marking rubber tires, 360° swivel front casters and an ergonomic top handle for easy control and handling
No Tools Pre-Filter Access: Hinged door secured by rotating latches, with full perimeter gasket seal to protect against bypass of contaminated air
Pre-filter Mounting: - Individual shelves for each pre-filter
Stage 1 pre-filter - Inexpensive, 1"" deep FIBER-TRAPPER® pre-filter for capturing large particulates; can be washed and reused or treated as a disposable (MERV 4)
Stage 2 pre-filter - 2""-deep pleated prefilter (MERV 8)
Stage 3 optional pre-filter - 2""-deep high-capacity VAPOR-LOCK® carbon filter for gas and odor adsorption (MERV 7)
Final stage HEPA filter - IEST compliant metal-frame, HEPA filter with tested and certified minimum efficiency of 99.97% @ 0.3 microns
Airflow ratings estimates are based on factory and independent testing @ 120 VAC with an air straightener and a traverse of readings taken with a computing vane-anemometer. Actual results may vary for various reasons,including motor and blower and HEPA filter tolerances. Factors such as filter loading, reduced voltage to the motor, and inlet and outlet ducting will reduce airflow. Use these ratings as a general guideline only.
Compact, Upright Design Fits Easily into Tight Spaces
The full-feature HEPA-AIRE PAS1200 Portable Air Scrubber from Abatement Technologies® is the stainless-steel counterpart to our PRED1200 model, with similar performance characteristics. The PAS1200 features variable airflow control from 300 cfm to 900 cfm. Multiple units can be daisy-chained on one 15-amp circuit via the GFCI-protected duplex receptacles. The PAS1200 is capable of maintaining 6 ACH in spaces up to 7,500-9,000 ft³ at peak rated airflow.
The PAS1200 Portable Air Scrubber is designed to employ up to four filter stages to remove potentially hazardous airborne particles from healthcare construction, maintenance, and renovation zones
Features of the HEPA-AIRE PAS1200 Portable Air Scrubber include
Filters Pollutants Using up to Four Stages of Filtration
The PAS1200 uses a special backward-curved blower and high-speed motor to pull pollutants through up to four stages of filtration.
Recessed Control Panel
The recessed control panel provides all controls in one location.
Control Panel Features:
All Abatement HEPA-AIRE® units have been tested by a Nationally Recognized Testing Laboratory (NRTL) and carry the marks certifying that they comply with applicable OSHA, UL and CSA electrical safety standards. Filters meet UL900 flammability standards. Learn more about the importance of product safety certification in the Learning Center.
The filters listed are for the most recent versions of our equipment. Please confirm fit with your solutions specialist when placing an order.
Customers who purchased this product were also interested in the following products: