product-banner

LIGHTWEIGHT
Powerful

HEPA-AIRE® PAS2400 Portable Air Scrubber

    • Two-speed motor
    • Peak airflow 2,100 cfm high / 700 cfm low
    • True HEPA filter, 99.97% efficiency tested & certified
    • High quality stainless steel cabinet
    • The high-speed motor and exemplary backward curved blower produce up to 60% more vacuum power than other 120 VAC systems

Download Product Info

Air Change Calculator

$0.00
In stock
SKU
PAS2400
PAS2400

The Ultimate Combination of Power & Portability 

Exceptional performance and a full array of user-friendly features have made the Abatement Technologies® PAS2400 Portable Air Scrubber* a popular choice for capturing airborne particles during facility construction and renovation. With peak tested airflow of up to 2,100 cfm, and a maximum static lift of 5.5”, it’s the highest output Portable Air Scrubber that is NRTL-certified to operate safely on a 120 V/15 amp electrical supply.

The PAS2400 Portable Air Scrubber has several filter stages with exceptional dirt-holding capacity, and optional gas and odor removal capabilities:

  • Stage 1 - Inexpensive 1" FIBER-TRAPPER® 1.0 pre-filter
  • Stage 2 - 2" pleated particulate pre-filter
  • Stage 3 (optional) - 2" high-capacity VAPOR-LOCK® carbon filter for odors (not included)
  • HEPA filter - Tested and certified to 99.97% minimum efficiency @ 0.3 microns

‘Zero Bypass’ Design and True HEPA Filter

A unique cabinet design and a true high-capacity, IEST-compliant HEPA filter help ensure that the PAS2400 exhausts 99.97%+ efficiency air out of the work area, job after job, month after month."

The PAS2400 comes equipped with many outstanding features including:

  • Portability - The upright, two-module design with built-in transport dolly enhance the mobility and maneuverability of the PAS2400 and its ability to operate in tight spaces
  • Power - The custom-designed, high-speed motor and exemplary backward curved blower allow the PAS2400 to produce up to 60% more vacuum power than other 120 VAC systems
  • Economy - The high dirt-holding capacity of the PAS2400 pre-filters and long life non-electrostatic HEPA filter extend the useful life of the filters and reduce replacement filter costs
  • Efficiency - True 99.97%-certified HEPA filter retains its original 99.97%+ efficiency, even after hundreds of hours of operation
  • User-Friendly Controls - A complete array of convenient controls enables users to continuously monitor the operating status of the PAS2400
  • Safety First - NRTL certified to conform to UL507 and CSA 22.2 safety standards
  • Export Model Available - The 230V/50-60Hz PAS2400TF model is designed specifically for overseas users

 

Portable and Maneuverable

The upright design, built-in transport dolly and perfect weight and balance of the PAS2400 enables the operator to effortlessly tilt it back and wheel silently to the work area.

Built-in Stair Climber

The built-in stair climber further enhances portability by making it easier to go up or down stairs. The upper pre-filter module can also be detached and hand-carried to further lighten the load.

Modular Control Panel

Everything you need to operate the PAS2400 is conveniently located in one location.

Control Panel Features:

  • Speed control switch
  • Green ‘Unit On’ indicator lamp
  • ‘Replace Pre-filter’ indicator lamp
  • ‘Replace HEPA’ indicator lamp
  • GFCI-protected
  • Hour meter

All Abatement HEPA-CARE units have been tested by a Nationally Recognized Testing Laboratory (NRTL) and carry the marks certifying that they comply with applicable OSHA, UL and CSA electrical safety standards. Filters meet UL900 flammability standards. Learn more about the importance of product safety certification in the Learning Center.

Dimensions (L x W x H)
80.01 x 56.52 x 126.37 cm (31.5" x 25.25" x 49.75")
Air Changes per Hour
6 ACH in areas up to 18,000-21,000 sq ft
Airflow
700-2,100 CFM
Net Weight With Filters
170 lb
Power Supply Requirements
120 VAC, 60 hz, 15 A
Electrical Safety
NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984
Cabinet Material
20 gauge stainless steel construction with solid, aircraft-type rivets
Pre Filter Access
Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
Stage 2 Pre_Filter
Pleated, 2-deep filter for medium-sized particulates (10-100 microns)
Stage 1 pre-filter
1-deep FIBER-TRAPPER 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
Stage 3 optional pre-filter
(not included) - High-capacity 2-deep VAPOR-LOCK carbon filter for gases & odors
Final stage HEPA filter
High-capacity, for 0.1-10 micron particles, certified test efficiency of 99.97% or higher @ 0.3 microns, metal-frame Inlet/Outlet
Motor Blower
High-efficiency type, 3,450 RPM, 1.5 HP Backward Curved Blower:Anodized-Aluminum, 5.5 peak static lift
Pre Filter Mounting
Separate slide-in compartments for up to 3 pre-filter stages
Amperage
12 amps or less (safe for 15A circuits)
Control Panel
Off/High/Low-speed selector switch, green power indicator lamp, separate amber ‘Replace Pre-filter and ‘replace HEPA lamps, hour meter, resettable pop-out 12A circuit breaker
Built in Dolly
Yes

You are being redirected to your country's store, based on your location. Please choose accept.


Copyright © 2013-present Magento, Inc. All rights reserved.