PRS Water Damage Preclean

Timely and Productive Results

Bio-based PRS Water Damage Preclean is formulated to help water damage restoration professionals achieve timely and productive results. PRS Water Damage Preclean goes to work the moment you apply it, and keeps working until all soils are digested or water removal limits bioremediation activity.

PRS Water Damage Preclean eliminates the worst odors from water and heavy black water damage shortly after application. Conventional odor control methods and products are not required. In the event of a major catastrophe, applying PRS Water Damage Preclean initially provides a way to begin the soil removal and odor control process even before the first cleanup crew is on-site. Non-PRS chemistry should not be introduced while PRS Water Damage products are at work.

Click to download the PRS Water Damage Preclean data sheet. Click to download the Professional Restoration Series Cleaning Solutions brochure showing the entire line of sustainable solutions for health, productivity and the environment.

Recommended Procedures for Water Damage

PRS Water Damage Preclean is step 1 of a 3-step green, bio-based remediation process. The first fully trained staff on-site should apply PRS Water Damage Preclean to the contaminated area as indicated in the recommended procedures for water damage. Product quantities required may vary based on temperature and soil load. Area must remain visibly wet for 10-20 minutes for complete odor control. Soil degradation begins after 10-20 minutes. The longer the area has wet contact time, the greater the soil degradation and the greater the penetration.

Ambient temperature must be between 50°F and 122˚F. Performance is best between room temperature and 104˚F. Ensure that the area is not contaminated with disinfectant, chlorine or oxidizing agents, which might de-activate the PRS biological process. Click to download recommended procedures for water damage.

Shake well before using. Do not use below 50°F.

Standing Black Water/Heavy Load

Apply 2 gallons PRS Preclean per 400 ft² per one-foot depth. (1-gallon/1,500 gallons of black water).

Standing Black Water/Moderate Load

Apply 1 gallon PRS Preclean per 400 ft² per one-foot depth (1 gallon/3,000 gallons of black water).

Dried or Moist Load

Dilute 1 gallon PRS Preclean with at least 1 gallon of water. For example, fill a 2 gallon pump up sprayer with 1 gallon PRS Preclean and 1 gallon of water. Apply until the contained area is visibly wet. Reapply as required to maintain visible wetness. Depending on the surface and drying conditions, a 2 gallon pump-up sprayer can cover up to 1,000 ft². Use any standing water or existing moisture as part or all of your dilution calculations.

Perform physical cleanup per IICRC S-500 guidelines. Extract residual, and remove contents, carpets, etc. depending on category of contamination. Clean all surfaces and then apply PRS Water Damage Post Clean based on instructions. Start your drying process as soon as possible.

All data statements and information presented herein are believed to be accurate and reliable but are not to be taken as a guarantee, express warranty or implied warranty or merchantability or fitness for a particular purpose, or representation, express or implied, for which seller assumes legal responsibility, and they are offered solely for your consideration, investigation and verification. Statements or suggestions concerning possible use of this product are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe on any patent.