AQUATRAP AT450S All-Temperature Dehumidifier Brochure
AQUATRAP® AT450S All-Temperature, High-Capacity LGR Dehumidifier
“As good, if not better, than any other LGR high-temperature dehumidifier on the market…” – Kurt Bolden, Hydro Lab
The powerful AQUATRAP AT450S All-Temperature, portable LGR Dehumidifier from Abatement Technologies® delivers unsurpassed structural drying power for large-scale commercial water restoration projects. The anodized aluminum AT450S has the capacity to remove 180+ pints per day at AHAM, with performance optimized at 95° F. But what really sets the real-life performance of this LGR dehumidifier apart from the competition is its ability to outperform under a wide range of jobsite conditions. As a result, your crews can efficiently remove water at high temperatures (up to 125° F), at low temperatures (33° F), and everywhere in between!
Superior dehumidification performance features of the AQUATRAP AT450S LGR Dehumidifier include:
- 180+ pints/day water removal @ AHAM and up to 300 pints/day @ saturation
- Powerful 450 CFM airflow
- Exceptional grain depression
- 33° F to 125° F operating range
- Performance optimized @ 95° F
- Unique automated heat pump defrost technology
Industry-Leading Heat Pump Technology for Faster, More Effective Large-Scale Structural Drying at Both High Temperatures and Low Temperatures
State-of-the-art heat pump technology provides the AT450S High-Performance LGR Dehumidifier with its unique ability to operate efficiently in all types of drying environments. This technology enables the AT450S to defrost only when needed, and to remove water even in defrost mode.
Superior “Beyond Bypass” Technology
Systems utilizing “bypass” technology must slow down airflow (cfm) by up to 50% as the air is cooled moving across the evaporator to condense water. Not so with the AQUATRAP AT450S that utilizes heat pump technology! The AT450S provides a constant 450 cfm airflow – especially in hot conditions above 100° F – keeping work crews productive and structures drying faster.
Lightweight Anodized Aluminum Cabinet
The cabinet of the AQUATRAP AT450S is made from a marine alloy of hard anodized aluminum. Anodized aluminum retains the basic advantages of aluminum while providing greatly improved durability, corrosion resistance and thermal resistance. Click to learn more about the benefits of the AQUATRAP AT450S anodized aluminum cabinet.
Easy-to-Operate
Automated user controls make using the AT450S a snap. Simply set it up and let it do the work. Additional ease-of-use features include a protected bottom drain that removes residual water from the unit and protects the internal pump from cracking when operating or storing in freezing temperatures.
The AT450S Dehumidifier Delivers Unsurpassed LGR Water Removal and Exceptional Grain Depression
The AQUATRAP AT450S LGR Dehumidifier is equipped w
ith many outstanding design innovations, including:
- Portability - Upright cabinet design with built-in transport dolly and 12" rear wheels
- Ruggedness - Durable construction and heavy duty components
- Performance Optimization - Tuned to provide maximum performance
efficiency @ 95° F - All Temperature Performance - Efficient and effective water removal and grain depression under a wide range of temperature and humidity conditions
- Ease of Use - Reliable and easy-to-use controls; automatic, operator-free heat regulation & defrost
- Air Filtration - MERV 8 efficiency pleated filter
- Removable Aluminum Core - More efficient air and heat transfer; easy access allows faster, easier and more thorough cleaning
- Protected Bottom Drain - Removes residual water to prevent internal pump from cracking at freezing temperatures
Links for AQUATRAP AT450S Dehumidifier Product Information
Specs
- Water Removal Rate - 180+ ppd @ AHAM. 300 ppd @ saturation
- Airflow - 450 CFM
- Temperature Operating Range - 33° F to 125° F. Tuned to optimize performance @ 95° F
- Net Weight - 149 pounds
- Dimensions (D x W x H) - 24.25” D x 20.5” W x 40.0” H
- Power Supply Requirements - 115 VAC
- Peak Operating Current - 12 A
- Electrical Safety - ETL-certified for the U.S. & Canada
- Motor/Blower - High-efficiency, backward curved motorized impeller
- Controls - Off/On rocker switch, purge switch, defrost lamp, digital operating hour meter
- Cabinet Material - Anodized aluminum construction
- Built-in Dolly - Two-wheel dolly with 12" rear wheels and a secure top handle for easy movement and control
- Filter - MERV 8 pleated media, UL Listed
- Duct Options- Intake: fits 10” collar (included) for 10" flex-duct. Outlet: fits 10" collar (included) for flex-duct or 12" lay-flat duct
Flexible Ducting Options
The 10” collar for the top-mounted air intake on the AQUATRAP AT450S
can accommodate 10” flex-duct (collar shown). The side-mounted
air outlet directs low-grain exhaust out and fits a 10” collar for either
10” flex-duct or 12” lay-flat duct (collar shown).
Built-In Dolly with Adjustable Handle and Inboard
Rear WheelsThe built-in dolly includes a secure, adjustable handle for easier movement around the job site and helps protect the control panel in the lower position. The lower handle position allows efficient two-high stacking, warehouse storage and transport in a vehicle. Inboard 12" rear wheels are attached to the unit in a protected wheel well close to the body for better maneuverability and tighter storage.
Protected Bottom Drain
A protected bottom drain allows
residual water to drain
out
of the
unit and helps
prevent
internal pump or
case cracking at freezing temperatures.
Intuitive Control Panel
The straightforward design of the control panel
makes the AT450S easy to set-up and operate.Control Panel Features:
- Durable Off/On rocker switch
- Automatic defrost lamp indicator
- Digital hour meter
- Pump purge switch
The AQUATRAP AT450S LGR Dehumidifier has been tested by Environmental Testing Laboratories (ETL), a Nationally Recognized Testing Laboratory (NRTL), and carries the ETL (U.S.) and ETLC (Canada) marks certifying that it complies with applicable OSHA and CSA electrical safety standards. Learn more about the importance of product safety certification.
Stocked Filter & Accessories Ready for Immediate Delivery
Filters |
||
|
 |
MERV 8 Pleated Filter: Case of 6 |
Accessories |
||
|
Inlet & Outlet Ducting:Clear Heavy Duty Flex, Wire Reinforced
(10” diameter x 25’ long) |
|
 |
Lay-Flat Outlet Ducting:Clear, Lay-Flat Exhaust Ducting, (12” dia. x 500’ long) |
|
Related Products Frequently Bought Together
Customers who purchased Abatement Technologies AQUATRAP AT450S Dehumidifier also often purchased one or more of the following related products:
|
RAPTOR® RAM1000DBL & RAM1000SBL High-Velocity Centrifugal Air Movers
|
|
|
RAPTOR RAM3000DBL & RAM3000SBL High-Velocity Axial Air Mover |
|
| Please contact us for pricing and shipping information. |
