ISOQUAD® IQ200 Bed Isolation Module

Protects Patients and Staff and Increases Surge Capacity

More ISOQUAD IQ200 Bed Isolation Module Brochure

 

 

 

 

 

To speak with a Patient Isolation Specialist, call:

U.S. 800-634-9091
Canada 800-827-6443
International 678-889-4200

Mon-Fri 8 AM - 5:30 PM Eastern

e-mail:

Home > Patient Isolation > Products > Bed Isolation Module

ISOQUAD® IQ200 Bed Isolation Module

Economical Pop-Up Bed Isolation Module Protects Patient and Staff and Increases Isolation Surge Capacity

The ISOQUAD IQ200 Bed Isolation Module from Abatement Technologies® provides a fast, cost-effective solution for isolating potentially infectious patients in any size bed or gurney. The ISOQUAD IQ200 pops-up in seconds to protect patients and staff from exposure to infectious airborne pathogens and increase isolation surge capacity.

 

ISOQUAD IQ200 Bed Isolation ModuleUnique features that make the ISOQUAD IQ200 the perfect solution for patient isolation include:

  • Lightweight - Weighs just 25 lbs.
  • Fast Set-Up - Pops-up in seconds. No tools required
  • Tough - Tear-resistant and flame-retardant fabric meets CPAI-84 flame spread safety standards
  • Cost-Effective - Affordable patient isolation solution for acute and chronic care hospitals, clinics and other healthcare facilities
  • Secure - “Dirty-to-Clean” directional airflow effectively contains pathogens
  • Highly Adaptable - IQ200 fits virtually any size bed or gurney
  • Portability - Easy to store and move in a compact, soft carrying case with handle
  • Easy Patient Access - Open front provides unrestricted
    provider or equipment access
  • Bright and Airy - Three clear PVC windows provide
    unobtrusive view of patient for monitoring

 

Negative Pressure Infectious Patient IsolationNegative Pressure Infectious Patient Isolation

The IQ200 is commonly used in combination with Abatement Technologies PREDATOR® or HEPA-AIRE® Portable Air Scrubbers (PAS) to create negative pressure infectious patient isolation environments right in the bed or gurney. To use the ISOQUAD IQ200 in negative pressure mode, connect the flex duct between the PVC collar at the rear of the module to the inlet collar of the Portable Air Scrubber (PAS). This creates negative (lower) air pressure and “foot-to-head” directional airflow within the enclosure so that infectious droplets expelled by the patient flow away from the enclosure opening. “Dirty” air is HEPA-filtered by the Abatement PAS and exhausted back into the room.

 

Positive Pressure Protective IsolationPositive Pressure Protective Isolation

The versatile ISOQUAD IQ200 Module is also configured with Abatement Technologies PREDATOR or HEPA-AIRE Portable Air Scrubbers (PAS) to create positive pressure Protective Environments (PE) for sensitive or immune-compromised patients. To use the ISOQUAD IQ200 in positive pressure mode, connect the flex duct between the PVC collar at the rear of the module to the exhaust collar of the PAS. This creates positive (higher) air pressure within the enclosure and “head-to-foot” directional airflow making it more difficult for infectious pathogens to reach highly-sensitive patients.

 

Download the ISOQUAD IQ200 Bed Isolation Module brochure. Contact Us for pricing or more information about the ISOQUAD IQ200 Bed Isolation Module.

 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

The highly portable ISOQUAD IQ200 weighs just 25 pounds.

 

 

Easy to Carry and Store

The highly portable ISOQUAD IQ200 weighs just 25 pounds and fits in a convenient soft storage pouch with carry handle (76” long x 8” diameter).

 

 

 

 

 

 

 

 

The ISOQUAD IQ200 Bed Isolation Module.

 

 

Fits Any Size Bed or Gurney

The ISOQUAD IQ200 Bed Isolation Module
accommodates any size bed or gurney and
can be set-up in virtually any space.

 

 

 

 

 

ISOQUAD IQ200 Bed Isolation Module featires clear windows.

 

 

 

Convenient Patient Monitoring

Three clear PVC view windows provide
ample light and convenient patient monitoring.

 

 

 

 

 

 

 

 

 

 

Side Ports for Pass Through of Equipment Cords and Tubes

 

 

Side Ports for Pass Through of Equipment Cords and Tubes

Side ports with Velcro covers provide a protective
pass through of cords and tubes to patient medical devices
located outside of the ISOQUAD IQ200 enclosure.

 

 

 

Fast set-up with the ISOQUAD IQ200

 

 

 

 

Fast Set-Up

The ISOQUAD IQ200 becomes operational in seconds simply by “popping” out the side module into the locked position.

 

 

 

 

 

 

 

PRED600HC Portable Air Scrubber

PRED600HC Portable Air Scrubber with Rotationally-Molded Cabinet

The rotationally-molded PREDATOR® model PRED600HC Portable Air Scrubber is the perfect unit for creating negative pressure or positive pressure isolation environments within the ISOQUAD IQ200 enclosure. The HEPA-filtered PRED600HC weighs only 34 pounds, yet produces outstanding peak airflow of 600 cfm on an amperage draw of 2.5 amps or less. Click to read more information about the PRED600HC Portable Air Scrubber.

   

PRED1200HC Portable Air Scrubber

PRED1200HC Portable Air Scrubber with Rotationally-Molded Cabinet

A second option for creating negative pressure or positive pressure isolation environments within the ISOQUAD IQ200 enclosure is the rotationally-molded PREDATOR model PRED1200HC Portable Air Scrubber. The HEPA-filtered PRED1200HC is a more powerful unit that produces an eye-popping peak airflow rating of 900 cfm at 3.5 amps or less, yet weighs only 70 pounds. Click to read more information about the PRED1200HC Portable Air Scrubber. You can also add the microorganism-killing power of UVGI germicidal radiation with HEPA-filtration with the PRED1200UVHC Portable Air Scrubber.

   
Flex Duct

Flex Duct: H2030-10 ( 10” diameter X 25’ long)

   
Locking Clamp for Flex Duct Attachment

Locking Clamp for Flex Duct Attachment: H2350-10 (1 ea.)