HEPA-AIRE® PAS2400 Portable Air Scrubber
Designed to Handle the Toughest Industrial Environments
The PAS2400 comes equipped with many outstanding features including:
- Portability - The upright, two-module design with built-in transport dolly enhance the mobility and maneuverability of the PAS2400 and its ability to operate in tight spaces
- Power - The custom-designed, high-speed motor and AT Gold blower allow the PAS2400 to produce up to 60% more vacuum power than other 120 VAC systems
- Economy - The high dirt-holding capacity of the PAS2400 pre-filters and long life non-electrostatic HEPA filter extend the useful life of the filters and reduce replacement filter costs
- Efficiency - True 99.97%-certified HEPA filter retains its original 99.97%+ efficiency, even after hundreds of hours of operation
- User-Friendly Controls - A complete array of convenient controls enables users to continuously monitor the operating status of the PAS2400
- Safety First - ETL/ETLc-certified to conform to UL507 and CSA 22.2 safety standards
- Export Model Available - The 230V/50-60Hz PAS2400TF model is designed specifically for overseas users
Click to download the HEPA-AIRE PAS2400 Portable Air Scrubber brochure with product specs. Download the features, performance and specifications for all HEPA-AIRE Portable Air Scrubber models.
Learn more about the importance of maintaining sufficient air changes per hour (ACH) and negative pressure to properly clean the air.
Learn more about true HEPA filtration and IEST (Institute of Environmental Sciences & Technology) manufacturing, testing and labeling requirements.
Click for more information on Nationally Recognized Testing Laboratory product safety certification and why it is so important.
Click for more information on the difference between tested ‘in-use’ airflow ratings versus meaningless ‘nominal’ or ‘free air’ blower ratings.
Click to determine the number of Portable Air Scrubbers needed to produce the required air changes per hour (ACH) for maintaining negative pressure and effectively capturing air contaminants.
Contact Us for more information about the PAS2400 Portable Air Scrubber.
PAS2400 Portable Air Scrubber
- Rated Airflow* - 700-2,100 cfm
- Air Changes Per Hour - 6 ACH in areas up to 18,000-21,000 ft³
- Net Weight with Filters - 170 pounds
- Dimensions (L x W x H) - 31.50”L x 25.25”W x 49.75”H
- Power Supply Requirements - 120 VAC, 60Hz, 15 amps
- Normal Operating Current - 12 amps or less (safe for 15A circuits)
- Electrical Safety - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
- Motor - High-efficiency type, 3,450 RPM, 1.5 HP
- AT Gold Blower - Anodized-Aluminum, 5.5” peak static lift
- Controls - Off/High/Low speed selector switch, green power indicator lamp, separate amber ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, hour meter, resettable pop-out 12A circuit breaker
- Cabinet Material - 20 gauge stainless steel construction with solid, aircraft-type rivets
- Built-in Dolly - Two-wheel dolly with 10” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for easy movement & control
- Easy to Replace Pre-Filters - Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
- Pre-Filter Mounting - Separate slide-in compartments for up to 3 pre-filter stages
- Filters:
- Stage 1 pre-filter - Inexpensive, 1”-deep FIBER-TRAPPER® 1.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
- Stage 2 pre-filter - Pleated, 2”-deep filter for medium-sized particulates (10-100 microns)
- Stage 3 pre-filter (not included) - High-capacity 2"-deep VAPOR-LOCK® carbon filter for gases & odors
- Final stage HEPA filter - High-capacity, for 0.1-10 micron particles, certified test efficiency of 99.97% or higher @ 0.3 microns, metal-frame
- Inlet/Outlet Manifold - Molded slide-in plastic manifold for attaching 12” inlet or outlet ducting (one included)
*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off for convenience.
HEPA-AIRE® Portable Air Scrubbers: Performance & Specifications
Download
Printer Friendly Chart
PAS600 |
||||
AIRFLOW*: |
700 - 2,100 cfm |
1,000 - 1,600 cfm |
150 - 900 cfm |
200 - 600 cfm |
PEAK AIR CHANGES PER HOUR (ACH): |
6 ACH @ 21,000 ft3 |
6 ACH @ 16,000 ft3 |
6 ACH @ 9,000 ft3 |
6 ACH @ 6,000 ft3 |
ELECTRICAL REQUIREMENTS: |
120 volt/15 ampere/60 Hz |
120 volt/15 ampere/60 Hz |
120 volt/15 ampere/60 Hz |
120 volt/15 ampere/60 Hz
|
NORMAL OPERATING AMPS: |
12 amp draw or less |
10 amps or less |
3.5 amp draw or less @ 1,000 cfm. Multiple units daisy-chain on one 15 ampere circuit |
2.5 amp draw or less @ 600 cfm. Multiple units daisy-chain on one 15 ampere circuit |
BUILT-IN CIRCUIT BREAKER: |
15 amps |
15 amps |
10 amps |
12 amps |
MOTORIZED IMPELLER: |
1.5 hp motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation |
1.75 hp blower w/thermal overload protection & auto reset |
400 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation |
255 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation |
CABINETRY: |
20 gauge stainless steel aircraft construction with solid rivets |
20 gauge stainless steel aircraft construction with solid rivets |
20 gauge stainless steel aircraft construction with solid rivets |
20 gauge stainless steel aircraft construction with solid rivets |
TRANSPORTABILITY: |
Built-in dolly with handle, 2 ea. 10” rear wheels with solid, non-marking rubber tires & 2 ea. 360° swivel casters in front |
Two-wheel dolly consisting of 8” solid, non-marking rubber rear wheels, 360° swivel front caters and a secure top handle for easy movement & control |
Two-wheel dolly consisting of 8” solid, non-marking rubber rear wheels, 360° swivel front caters and a secure top handle for easy movement & control |
Two top lift handles or optional caster cart; multiple units stack and nest on a two-wheel dolly |
SURFACE PROTECTION: |
Non-marking wheels and casters |
Non-marking wheels and casters |
Non-marking wheels and casters |
Attached rubber feet |
FILTERS: |
||||
Stage 1 Pre-Filter |
1”
coarse particulate pre-filter |
2”-deep FIBER-TRAPPER® 2.0 pre-filter (MERV 4) |
Inexpensive,
1” filter for capturing large particulates; can be washed & reused,
or treated as a disposable |
Inexpensive, high-capacity 1" FIBER-TRAPPER® 1.0 pre-filter for large particulates; can be washed & reused, or treated as a disposable (MERV 4) |
Stage 2 Pre-Filter |
2”
pleated particulate pre-filter |
n/a |
2" pleated filter to capture medium-sized particulates (MERV 6) |
2” pleated particulate pre-filter (MERV 6) |
Optional
Stage 2 |
n/a |
2” pleated prefilter (MERV 6) or 2” VAPOR-LOCK® carbon filter (MERV 7) |
n/a |
2" high-capacity VAPOR-LOCK® carbon filter for odor removal (MERV 7) |
Optional
Stage 3 |
2" high-capacity
VAPOR-LOCK® carbon filter pack to remove odors
(MERV 7) or a second Stage 2 particulate pre-filter |
n/a |
2" high-capacity
VAPOR-LOCK® carbon filter for odor removal |
n/a |
Final Stage HEPA Filter |
True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns |
True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns |
True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns |
True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns |
INDIVIDUAL PRE-FILTER MOUNTING SHELVES |
Yes |
Yes |
Yes |
No |
WEIGHT and DIMENSIONS: |
||||
Net Weight with Filters |
170 lbs. |
138 lbs. |
85 lbs. |
46 lbs. |
Overall Dimensions |
31.5”L x 25.25”W x 49.75”H |
21.5”L x 24.5”W x 45.5”H |
19.25”L x 22”W x 39”H |
28”L x 16.25”W x 17.5”H |
ELECTRICAL CONTROLS: |
||||
Dual GFCI-Protected Receptacles |
No |
No |
Yes, for daisy-chaining multiple units per 15 or 20 amp circuit |
Yes, for daisy-chaining multiple units per 15 or 20 amp circuit |
Green “Power On” Visual Indicator Lamp |
Yes |
Yes |
Yes |
Yes |
Operating Hour Meter |
Yes |
Yes |
Yes |
No |
Speed Control Switch |
Two speeds |
Two Speeds |
Variable |
Variable |
*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off to the nearest 50 cfm for convenience. |
||||
Portable and Maneuverable
The upright design, built-in transport dolly and
perfect weight and balance
of the PAS2400
enables the operator to effortlessly tilt it back
and wheel
silently to the work area.
Built-in Stair Climber
The built-in stair climber
further enhances portability
by making it easier
to go
up or down stairs. The upper
pre-filter module can also be
detached
and hand-carried
to further lighten the load.
 |
Modular Control Panel Everything you need to operate the PAS2400 is conveniently located
Control Panel Features:
|
|
Abatement HEPA-AIRE Portable Air Scrubbers have been tested by Environmental Testing Laboratories (ETL), a Nationally Recognized Testing Laboratory (NRTL), and carry the ETL (U.S.) and ETLC (Canada) marks certifying that they comply with applicable OSHA and CSA electrical safety standards. Learn more about the importance of product safety certification. |
 |
|
Stocked Filters & Accessories Ready for Immediate Delivery
Filters |
||
|
|
|
First Stage FIBER-TRAPPER® Particulate Pre-filter: F1821-12 (case of 12 ea.) |
 |
Second Stage Particulate Filter: H1902-6 (case of 6 ea.) |
|
 |
Optional Third Stage VAPOR-LOCK® High Capacity Activated Carbon Filter: VL2002-6 (case of 6 ea.), VL2002 (1 ea.) |
|
 |
Final Stage 99.97% HEPA Filter: H2418-99 (1 ea.) |
|
Accessories |
||
|
Molded Inlet Manifold: H1980P (1 ea.) |
|
 |
Locking Clamp for Flex Duct Attachment: H2350-12 (1 ea.) |
|
Flex |
||
|
Flex Duct: H2030-12 (12” diameter X 25’ long)A selection of 12” diameter flex duct materials and lengths are available. |
|
Related Products Frequently Bought Together
Customers who bought Abatement Technologies Portable Air Scrubbers also purchased one or more of the following related products:
Containment Barrier |
||
|
|
|
Additional Particle Control Products |
||
|
|
|
|
|
|
|
|
|
