Air Scrubber | HEPA-AIRE PAS1800 Portable Air Scrubber | Remodeling Construction Renovation Contractors | Air Purifier

Replace Bulky Negative Air Machines with Quiet, Portable Airflow

PAS1800 Portable Air Scrubber for Contractors

Features of the HEPA-AIRE PAS1800 Portable Air Scrubber include:

Easy to Transport - 8” rear wheels have smooth, non-marking tires to roll up or down stairs and protect against floor damage.
Upright Design - Built-in two-wheel transport dolly with front swivel casters enables one person to tilt back the PAS1800 and move it almost effortlessly
Highly Maneuverable in Tight Spaces - Front 360° swivel casters for “turning on a dime” in small spaces
Powerful Airflow - 1,600 cfm (H)/1,000 cfm (L); creates up to 6 ACH @ 15,000 to 16,000 ft³
User-Friendly Controls - Recessed control panel, two operating speeds and filter change indicator lamps

Click to download the HEPA-AIRE PAS1800 Portable Air Scrubber brochure with product specs. Learn more about the importance of maintaining sufficient air changes per hour (ACH) and negative pressure to isolate and contain airborne particles, odors and other contaminants.

Learn more about true HEPA filtration and IEST (Institute of Environmental Sciences & Technology) manufacturing, testing and labeling requirements.

Click for more information on Nationally Recognized Testing Laboratory product safety certification and why it is so important.

Click for more information on the difference between tested ‘in-use’ airflow ratings versus meaningless ‘nominal’ or ‘free air’ blower ratings.

Click to determine the number of Portable Air Scrubbers needed to produce the required air changes per hour (ACH) for maintaining negative pressure and effectively capturing air contaminants.

Contact Us for more information about the PAS1800 Portable Air Scrubber.

PAS1800 Portable Air Scrubber

Rated Airflow* - 1,000-1,600 cfm
Air Changes Per Hour - 6 ACH in areas up to 16,000 ft³
Net Weight with Filters - 138 pounds
Dimensions (L x W x H) - 21.5”L x 24.5”W x 45.5”H
Power Supply Requirements - 120 VAC, 60Hz, 15 amps
Normal Operating Current - 10 amps or less (safe for 15A circuits)
Electrical Safety - NRTL-certified to comply with UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 for electrical safety
Motor - 1.75 HP
Controls - Off/High/Low speed selector switch, separate amber ‘Replace Pre-filter’ and ‘replace HEPA’ lamps, hour meter
Cabinet Material - 20 gauge stainless steel construction with solid, aircraft-type rivets
Built-in Dolly - Two-wheel dolly with 8” solid, non-marking rubber rear wheels, 360° swivel front casters and a secure top handle for easy movement & control
Easy to Replace Pre-Filters - Hinged and latched pre-filter access door with a full perimeter gasket seal to protect against dirty-air bypass
Filters:

Stage 1 - Inexpensive, 2”-deep FIBER-TRAPPER^® 2.0 pre-filter for larger particulates (100+ microns); can be washed & reused, or treated as a disposable
Optional stage 2 - Pleated, 2”-deep filter for medium-sized particulates (10-100 microns) or 2" VAPOR-LOCK^® high capacity carbon filter specially designed to remove odors and vapors
Final stage HEPA filter - Certified test efficiency of 99.97% or higher @ 0.3 microns, metal-frame

Inlet Collar - Attached, 12” diameter
Optional Exhaust Manifold - Slide-in metal exhaust manifold with 12” diameter collar
Optional 12" Locking Clamps - Connects inlet and outlet exhaust manifolds to ducting

*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off for convenience.

HEPA-AIRE^® Portable Air Scrubbers: Performance & SpecificationsDownload Printer Friendly Chart

	PAS1800	PAS2400	PAS1200	PAS600
*AIRFLOW:**	1,000 - 1,600 cfm	700 - 2,100 cfm	150 - 900 cfm	200 - 600 cfm
PEAK AIR CHANGES PER HOUR (ACH):	6 ACH @ 16,000 ft³	6 ACH @ 21,000 ft³	6 ACH @ 9,000 ft³	6 ACH @ 6,000 ft³
ELECTRICAL REQUIREMENTS:	120 volt/15 ampere/60 Hz	120 volt/15 ampere/60 Hz	120 volt/15 ampere/60 Hz	120 volt/15 ampere/60 Hz
NORMAL OPERATING AMPS:	10 amps or less	12 amp draw or less	3.5 amp draw or less @ 1,000 cfm. Multiple units daisy-chain on one 15 ampere circuit	2.5 amp draw or less @ 600 cfm. Multiple units daisy-chain on one 15 ampere circuit
BUILT-IN CIRCUIT BREAKER:	15 amps	15 amps	10 amps	12 amps
MOTORIZED IMPELLER:	1.75 hp blower w/thermal overload protection & auto reset	1.5 hp motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation	400 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation	255 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation
CABINETRY:	20 gauge stainless steel aircraft construction with solid rivets	20 gauge stainless steel aircraft construction with solid rivets	20 gauge stainless steel aircraft construction with solid rivets	20 gauge stainless steel aircraft construction with solid rivets
TRANSPORTABILITY:	Two-wheel dolly consisting of 8” solid, non-marking rubber rear wheels, 360° swivel front caters and a secure top handle for easy movement & control	Built-in dolly with handle, 2 ea. 10” rear wheels with solid, non-marking rubber tires & 2 ea. 360° swivel casters in front	Two-wheel dolly consisting of 8” solid, non-marking rubber rear wheels, 360° swivel front caters and a secure top handle for easy movement & control	Two top lift handles or optional caster cart; multiple units stack and nest on a two-wheel dolly
SURFACE PROTECTION:	Non-marking wheels and casters	Non-marking wheels and casters	Non-marking wheels and casters	Attached rubber feet
FILTERS:
Stage 1 Pre-Filter	2”-deep FIBER-TRAPPER^® 2.0 pre-filter (MERV 4)	1” coarse particulate pre-filter (MERV 4)	Inexpensive, 1” filter for capturing large particulates; can be washed & reused, or treated as a disposable (MERV 4)	Inexpensive, high-capacity 1" FIBER-TRAPPER^® 1.0 pre-filter for large particulates; can be washed & reused, or treated as a disposable (MERV 4)
Stage 2 Pre-Filter	n/a	2” pleated particulate pre-filter (MERV 6)	2" pleated filter to capture medium-sized particulates (MERV 6)	2” pleated particulate pre-filter (MERV 6)
Optional Stage 2 (not included with unit)	2” pleated prefilter (MERV 6) or 2” VAPOR-LOCK^® carbon filter (MERV 7)	n/a	n/a	2" high-capacity VAPOR-LOCK^® carbon filter for odor removal (MERV 7)
Optional Stage 3 (not included with unit)	n/a	2" high-capacity VAPOR-LOCK^® carbon filter pack to remove odors (MERV 7) or a second Stage 2 particulate pre-filter (MERV 6)	2" high-capacity VAPOR-LOCK^® carbon filter for odor removal (MERV 7)	n/a
Final Stage HEPA Filter	True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns	True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns	True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns	True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns
INDIVIDUAL PRE-FILTER MOUNTING SHELVES	Yes	Yes	Yes	No
WEIGHT and DIMENSIONS:
Net Weight with Filters	138 lbs.	170 lbs.	85 lbs.	46 lbs.
Overall Dimensions	21.5”L x 24.5”W x 45.5”H	31.5”L x 25.25”W x 49.75”H	19.25”L x 22”W x 39”H	28”L x 16.25”W x 17.5”H
ELECTRICAL CONTROLS:
Dual GFCI-Protected Receptacles	No	No	Yes, for daisy-chaining multiple units per 15 or 20 amp circuit	Yes, for daisy-chaining multiple units per 15 or 20 amp circuit
Green “Power On” Visual Indicator Lamp	Yes	Yes	Yes	Yes
Operating Hour Meter	Yes	Yes	Yes	No
Speed Control Switch	Two Speeds	Two speeds	Variable	Variable
*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off to the nearest 50 cfm for convenience.

PAS1800

Exceptionally Maneuverable

The upright design of the PAS1800 makes
it a much more user-friendly upgrade from
larger and heavier negative air machines.
Built-in portability features include a convenient
transport dolly that enables one person to tilt
back the unit and move it almost effortlessly
and noiselessly through the facility. 8” rear
wheels and front 360° swivel casters provide
“turn-on-a-dime” maneuverability in tight spaces.

Recessed Control Panel

Everything you need to operate the PAS1800 is conveniently located in one location.

Control Panel Features:

Speed control switch
‘Replace Pre-filter’ indicator lamp
‘Replace HEPA’ indicator lamp
Hour meter

PAS1800 Recessed Control Panel

Abatement HEPA-AIRE Portable Air Scrubbers have been tested by Environmental Testing Laboratories (ETL), a Nationally Recognized Testing Laboratory (NRTL), and carry the ETL (U.S.) and ETLC (Canada) marks certifying that they comply with applicable OSHA and CSA electrical safety standards. Learn more about the importance of product safety certification.

Stocked Filters & Accessories Ready for Immediate Delivery

Filters
		First Stage FIBER-TRAPPER^® Particulate Pre-filter: F2221-12 (case of 12 ea.)

		Optional Second Stage Particulate Filter: H502-6 (case of 6 ea.) or VL1002-6 (case of 6 ea.), VL1002 (1 ea.)

		Final Stage 99.97% HEPA Filter: H1210C-99 (1 ea.)
Accessories
		Locking Clamp for Flex Duct Attachment: H2350-12 (1 ea.)

		Manifold (collar) for Flex Duct Attachment: PAS2012 (1 ea.)
Flex
		Heavy Duty PVC Flex Duct: H2030-12