PRED600HC Portable Air Scrubber

AIRFLOW*:

200 - 600 cfm

300 - 900 cfm

300 - 900 cfm

AIR CHANGES PER HOUR (ACH):

6 ACH in 5,000 - 6,000 ft³

6 ACH in 6,000 - 8,000 ft³

6 ACH in 6,000 - 8,000 ft³

ELECTRICAL REQUIREMENTS:

120 volt/15 ampere/60 Hz

120 volt/15 ampere/60 Hz

120 volt/15 ampere/60 Hz

NORMAL OPERATING AMPS:

2.5 amp draw or less @ 600 cfm. Multiple units daisy-chain on one 15 ampere circuit

3.5 amp draw or less @ 1,000 cfm. Multiple units daisy-chain on one 15 ampere circuit

3.5 amp draw or less @ 1,000 cfm. Multiple units daisy-chain on one 15 ampere circuit

BUILT-IN CIRCUIT BREAKER:

12 amps

12 amps

12 amps

MOTORIZED IMPELLER:

255 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation

400 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation

400 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation

CABINETRY:

UL94HB flame retardant resin with EPA-registered microbial & UV inhibitors

UL94HB flame retardant resin with EPA-registered microbial & UV inhibitors

UL94HB flame retardant resin with EPA-registered microbial & UV inhibitors

TRANSPORTABILITY:

Sturdy, built-in carrying handle; multiple units can be stacked & nested and transported with a 2-wheel dolly

Built-in dolly with handle, 2 ea. 8” rear wheels with solid, non-marking rubber tires & 2 ea. 360° swivel casters in front

Built-in dolly with handle, 2 ea. 8” rear wheels with solid, non-marking rubber tires & 2 ea. 360° swivel casters in front

RUBBER FEET:

Yes, 4 attached rubber feet to protect floors & secure unit during operation

n/a

n/a

FILTERS:

Stage 1 Pre-Filter

1” coarse particulate pre-filter (MERV 4)

1” coarse particulate pre-filter (MERV 4)

1” coarse particulate pre-filter (MERV 4)

Stage 2 Pre-Filter

2” pleated particulate pre-filter (MERV 6)

2” pleated particulate pre-filter (MERV 6)

2” pleated particulate pre-filter (MERV 6)

Optional Stage 2 Carbon Filter

VAPOR-LOCK^® carbon filter (MERV 7) to remove odors & vapors

n/a

n/a

Optional Stage 3 Pre- Filter

n/a

2” VAPOR-LOCK high-capacity carbon filter pack (MERV 7) to remove odors or a second Stage 2 particulate pre-filter (MERV 4)

2” VAPOR-LOCK high-capacity carbon filter pack (MERV 7) to remove odors or a second Stage 2 particulate pre-filter (MERV 4)

Final Stage HEPA Filter

True, non-electrostatic HEPA Filter Tested & Certified to a Minimum Efficiency of 99.97% @ 0.3 microns

True, non-electrostatic HEPA Filter Tested & Certified to a Minimum Efficiency of 99.97% @ 0.3 microns

True, non-electrostatic HEPA Filter Tested & Certified to a Minimum Efficiency of 99.97% @ 0.3 microns

HIGH-OUTPUT UVGI LAMP:

n/a

n/a

Internally mounted, 39-watt germicidal lamp module with safety interlock protection

OPERATIONAL SOUND LEVEL:

62 - 68 dBA reading taken at 5 feet

62 - 67 dBA reading taken at 5 feet

62 - 67 dBA reading taken at 5 feet

WEIGHT and DIMENSIONS:

Net Weight with Filters

34 lbs.

70 lbs.

70 lbs.

Shipping Weight

39 lbs.

95 lbs.

95 lbs.

Overall Dimensions

24”L x 18”W x 19.5”H

22”L x 24”W x 42”H

22”L x 24”W x 42”H

ELECTRICAL CONTROLS:

Dual GFCI-Protected Receptacles

Yes, for daisy-chaining multiple units per 15 or 20 amp circuit

Yes, for daisy-chaining multiple units per 15 or 20 amp circuit

Yes, for daisy-chaining multiple units per 15 or 20 amp circuit

Green “Power On” Visual Indicator Lamp

Yes

Yes

Yes

Operating Hour Meter

No

Yes

Yes

Variable Speed Switch

Yes

Yes

Yes

*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off to the nearest 50 cfm for convenience.