HEPA-AIRE^® PAS1200HC Portable Air Scrubber

AIRFLOW*:

150 - 900 cfm

700 - 2,100 cfm

200 - 600 cfm

PEAK AIR CHANGES PER HOUR (ACH):

6 ACH @ 9,000 ft³

6 ACH @ 21,000 ft³

6 ACH @ 6,000 ft³

ELECTRICAL REQUIREMENTS:

120 volt/15 ampere/60 Hz

120 volt/15 ampere/60 Hz

120 volt/15 ampere/60 Hz

NORMAL OPERATING AMPS:

3.5 amp draw or less @ 1,000 cfm. Multiple units daisy-chain on one 15 ampere circuit

12 amp draw or less

2.5 amp draw or less @ 600 cfm. Multiple units daisy-chain on one 15 ampere circuit

BUILT-IN CIRCUIT BREAKER:

10 amps

15 amps

12 amps

MOTORIZED IMPELLER:

400 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation

1.5 hp motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation

255 watt motorized impeller w/thermal overload protection & auto reset & designed for 100,000 hours maintenance free operation

CABINETRY:

20 gauge stainless steel aircraft construction with solid rivets

20 gauge stainless steel aircraft construction with solid rivets

20 gauge stainless steel aircraft construction with solid rivets

TRANSPORTABILITY:

Two-wheel dolly consisting of 8” solid, non-marking rubber rear wheels, 360° swivel front caters and a secure top handle for easy movement & control

Built-in dolly with handle, 2 ea. 10” rear wheels with solid, non-marking rubber tires & 2 ea. 360° swivel casters in front

Two top lift handles or optional caster cart; multiple units stack and nest on a two-wheel dolly

SURFACE PROTECTION:

Non-marking wheels and casters

Non-marking wheels and casters

Attached rubber feet

FILTERS:

Stage 1 Pre-Filter

Inexpensive, 1” filter for capturing large particulates; can be washed & reused, or treated as a disposable
(MERV 4)

1” coarse particulate pre-filter
(MERV 4)

Inexpensive, high-capacity 1" FIBER-TRAPPER^® 1.0 pre-filter for large particulates; can be washed & reused, or treated as a disposable (MERV 4)

Stage 2 Pre-Filter

2" pleated filter to capture medium-sized particulates (MERV 6)

2” pleated particulate pre-filter
(MERV 6)

2” pleated particulate pre-filter (MERV 6)

Optional Stage 2
(not included with unit)

n/a

n/a

2" high-capacity VAPOR-LOCK^® carbon filter for odor removal (MERV 7)

Optional Stage 3
(not included with unit)

2" high-capacity VAPOR-LOCK^® carbon filter for odor removal
(MERV 7)

2" high-capacity VAPOR-LOCK^® carbon filter pack to remove odors (MERV 7) or a second Stage 2 particulate pre-filter
(MERV 6)

n/a

Final Stage HEPA Filter

True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns

True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns

True, non-electrostatic HEPA filter tested & certified to a minimum efficiency of 99.97% @ 0.3 microns

INDIVIDUAL PRE-FILTER MOUNTING SHELVES

Yes

Yes

No

WEIGHT and DIMENSIONS:

Net Weight with Filters

85 lbs.

170 lbs.

46 lbs.

Overall Dimensions

19.25”L x 22”W x 39”H

31.5”L x 25.25”W x 49.75”H

28”L x 16.25”W x 17.5”H

ELECTRICAL CONTROLS:

Dual GFCI-Protected Receptacles

Yes, for daisy-chaining multiple units per 15 or 20 amp circuit

No

Yes, for daisy-chaining multiple units per 15 or 20 amp circuit

Green “Power On” Visual Indicator Lamp

Yes

Yes

Yes

Operating Hour Meter

Yes

Yes

No

Speed Control Switch

Variable

Two speeds

Variable

*Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off to the nearest 50 cfm for convenience.