HEPA-AIRE® Export Models for 230 Volt/50 Hz AC Electrical Supply
|
Two Models for Use in Countries with 230 Volt/50 Hz CurrentHEPA-AIRE H2500TFThe HEPA-AIRE H2500TF is identical to the H2500IV except it is designed to operate on a 230 volt/50 Hz AC electrical supply. It is the ultimate portable vacuum system for residential and commercial air duct cleaning. This full-featured, four-module model has all of the “bells and whistles” of the H2500IV, including a performance enhancing electronics package with Variable Frequency Drive. HEPA-AIRE H4500TFThe dual motor/blower HEPA-AIRE H4500TF is identical to the H4500IV except it is designed to operate on a 230 volt/50 Hz AC electrical supply. It is the most powerful system available for commercial and industrial duct cleaning contractors. This full-featured, four-module model has all of the “bells and whistles” of the H4500IV, including a performance enhancing electronics package with two Variable Frequency Drives.
|
H2500TF
The H2500TF includes many unique features and engineering innovations such as:
- Microprocessor “thinks on the job” by monitoring filter loading, voltage input and amperage draw and automatically adjusts blower speed to provide maximum output within safe levels of electrical circuit
- Superior vacuum power produced by our exclusive high-performance, backward-curved AT Gold blower and high-efficiency motor
- Advanced electronic system controls with Variable Frequency Drive (VFD) provides pre-programmed “soft-starts” and operator amperage adjustment to maximize vacuum performance without over-amping the supply circuit
- Recessed covered control panel with hour meter, amperage adjustment dial and meter, circuit breaker, filter loading gauge, and audio and visual filter loading alarms
- Stainless steel cabinet projects a professional appearance, resists corrosion and is easy to clean
- High-capacity, three-stage filtration system: Washable and reusable filter bag; MERV 11 pleated bag filter; and 99.97% efficient HEPA filter
- Patented four-module design quickly detaches into separate units and can be hand carried by one person
- Built-in stair climber, swivel wheels and 25.4 cm. diameter smooth rubber tires make transport a breeze
- Compact, upright design enables the H2500TF to fit through standard doorways
Click to download the H2500IV brochure with product specs. Contact Us for more information about the H2500TF Portable Power Vacuum.
H4500TF

Product features of the H4500TF include:
- Dual high-efficiency motors and our exclusive high-performance, backward-curved AT Gold blowers create exceptional airflow and static lift
- Requires only two 230 V, 8 or 15 amp circuits for operation
- Dual microprocessors “think on the job” by monitoring filter loading, voltage input and amperage draw and automatically adjust blower speed to provide maximum output within safe levels of electrical circuit for each motor/blower unit
- Advanced electronic system controls with two Variable Frequency Drives (VFDs) provides pre-programmed “soft-starts” and operator amperage adjustment to maximize vacuum performance without over-amping the supply circuit
- Recessed covered control panel with hour meters, amperage adjustment dials and meters, circuit breakers, filter loading gauge, and audio and visual filter loading alarms
- Stainless steel cabinet projects a professional appearance, resists corrosion and is easy to clean
- High-capacity, three-stage filtration system: Washable and reusable filter bag; MERV 11 pleated bag filter; and 99.99% efficient HEPA filter
- Patented four-module design quickly detaches into separate units and can be hand carried by one person
- Built-in stair climber, swivel wheels and 25.4 cm. diameter smooth rubber tires make transport a breeze
- Compact, upright design enables the H4500TF to fit through standard doorways
- Extra vacuum power and large dirt-holding capacity for commercial and industrial duct systems
Click to download the H4500IV brochure with product specs. Contact Us for more information about the H4500TF Portable Power Vacuum.
H2500TF
- Cabinetry: 20 Gauge Stainless Steel
- Overall Weight: 90 Kgs.
- Overall Dimensions: 53.39cm W x 76.2cm D x 147.32cm H
- Inlet Module Weight: 9.55 Kgs.
- Inlet Module Dimensions: 53.39cm W x 64.77cm D x 31.75cm H
- Bag Filter Module Weight: 11.35 Kgs.
- Bag Filter Module Dimensions: 53.39cm W x 64.77cm D x 37.47cm H
- HEPA Module Weight: 14.55 Kgs
- HEPA Module Dimensions: 53.39cm W x 64.77cm D x 20.32cm H
- Power Module Weight: 54.55 Kgs
- Power Module Dimensions: 53.39cm W x 76.2cm D x 57.79cm H
- Peak Blower Performance*: 5,100 CMH , 8.4" w.g. static
- Electrical Requirements: 230 V/8 or 15 ampere/50 Hz
- Motor: 1.5 hp high-efficiency with thermal overload protection
- Blower: AT Gold backward-curved blower
- Integral Transport Cart: Yes
- 360° Front Swivel Casters: Yes
- Non-Marking Wheels: Yes, 25.4 cm diameter
- Non-Marking Stairclimber: Yes
- 3-Stage Filtration with HEPA: Yes
- Electronic Performance Enhancement: Yes, IntelliVac AC Controller
- Amperage Adjustment Switch: Yes
- Main Power Switch: Yes
- "Power On" Visual Indicator: Yes
- Power Cord Receptacle: Twist & Turn
- Operating Hour Meter: Yes
- Motor Amperage Gauge: Yes
- Magnehelic Gauge: Yes, 0-10" w.g.
*Airflow ratings are based on third party testing conducted @ 230 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off to the nearest 50 cfm for convenience.
H4500TF
- Cabinetry: 20 Gauge Stainless Steel
- Overall Weight: 129.54 Kgs.
- Overall Dimensions: 67.63cm W x 78.74cm D x 158.75cm H
- Inlet Module Weight: 11.36 Kgs.
- Inlet Module Dimensions: 67.63cm W x 64.77cm D x 31.75cm H
- Bag Filter Module Weight: 12.27 Kgs..
- Bag Filter Module Dimensions: 67.63cm W x 64.77cm D x 34.93cm H
- HEPA Module Weight: 27.27 Kgs.
- HEPA Module Dimensions: 67.63cm W x 64.77cm D x 34.29cm H
- Power Module Weight: 78.64 Kgs.
- Power Module Dimensions: 67.63cm W x 78.74cm D x 57.79cm H
- Peak Blower Performance*: 7,000 CMH , 8.4" w.g. static
- Electrical Requirements: 2 ea. 230 V/8 or 15 ampere/50 Hz
- Motor: 2 ea. 1.5 hp high-efficiency, three phase motors
- Blower: 2 ea. AT Gold backward-curved blowers
- Integral Transport Cart: Yes
- 360° Front Swivel Casters: Yes
- Non-Marking Wheels: Yes, 25.4 cm diameter
- Non-Marking Stairclimber: Yes
- 3-Stage Filtration with HEPA: Yes
- Electronic Performance Enhancement: Yes, 2 ea. IntelliVac AC Controllers
- Amperage Adjustment Switch: Yes
HEPA-AIRE Vacuums: Performance & Specifications
H2500TF |
H4500TF |
|
PRICE: |
US $7,900.00 |
US $9,900.00 |
PEAK BLOWER PERFORMANCE*: |
5,100 CMH |
7,000 CMH |
ELECTRICAL REQUIREMENTS: |
230 volt/8 or 15 ampere/50 Hz |
2 ea. 230 volt/8 or 15 ampere/50 Hz |
MOTOR: |
1.5 hp high-efficiency, three phase motor |
2 ea. 1.5 hp high-efficiency, three phase motors |
BLOWER: |
AT Gold backward curved blower |
2 ea. AT Gold backward curved blowers |
INTEGRAL TRANSPORT CART: |
Yes |
Yes |
360° FRONT SWIVEL CASTERS: |
Yes |
Yes |
NON-MARKING WHEELS: |
Yes, 25.4 cm diameter |
Yes, 25.4 cm diameter |
NON-MARKING STAIRCLIMBER: |
Yes |
Yes |
CABINETRY: |
20 Gauge Stainless Steel |
20 Gauge Stainless Steel |
WEIGHT and DIMENSIONS: |
||
Overall Weight |
90 Kgs. |
129.54 Kgs. |
Overall Dimensions |
53.39cm W x 76.2cm D x 147.32cm H |
67.63cm W x 78.74cm D x 158.75cm H |
Inlet Module Weight |
9.55 Kgs. |
11.36 Kgs. |
Inlet Module Dimensions |
53.39cm W x 64.77cm D x 31.75cm H |
67.63cm W x 64.77cm D x 31.75cm H |
Bag Filter Module Weight |
11.35 Kgs. |
12.27 Kgs |
Bag Filter Module Dimensions |
53.39cm W x 64.77cm D x 37.47cm H |
67.63cm W x 64.77cm D x 34.93cm H |
HEPA Module Weight |
14.55 Kgs. |
27.27 Kgs. |
HEPA Module Dimensions |
53.39cm W x 64.77cm D x 20.32cm H |
67.63cm W x 64.77cm D x 34.29cm H |
Power Module Weight |
54.55 Kgs. |
78.64 Kgs. |
Power Module Dimensions |
53.39cm W x 76.2cm D x 57.79cm H |
67.63cm W x 78.74cm D x 57.79cm H |
ELECTRICAL CONTROLS: |
||
Electronic Performance Enhancement |
Yes, IntelliVac AC Controller |
Yes, 2 ea. IntelliVac AC Controllers |
Amperage Adjustment Switch |
Yes |
Yes |
Main Power Switch |
Yes |
Yes (2) |
“Power On” Visual Indicator |
Yes |
Yes (2) |
Power Cord Receptacle |
Twist & Turn |
Twist & Turn (2) |
Operating Hour Meter |
Yes |
Yes (2) |
Motor Amperage Gauge |
Yes |
Yes (2) |
Magnehelic Gauge |
Yes, 0-10" w.g. |
Yes, 0-10" w.g. |
* Airflow ratings are based on third party testing conducted @ 120 VAC with clean filters in accordance with generally accepted testing methods using highly accurate electronic flow measurement equipment. Different testing methods may produce higher or lower results. Ratings have been rounded off to the nearest 50 cfm for convenience. |
||
Built-In Stair ClimberAll Abatement HEPA-AIRE Portable Power Vacuums include a built-in stair climber with non-marking stair belts. The stairclimber facilitates transport up or down stairs with the vacuum fully assembled, or with one or more of the lightweight upper modules detached.
|
|
High-Tech Control Panel on the H4500TFThe high-tech control panel on the H4500TF adds a positive company
image and Control Panel Features:
|
|




